Appearance
Pale Yellow Fluid Emulsion

A lightweight, fast-absorbing spray that delivers broad-spectrum sun protection while hydrating and refreshing the skin, leaving a natural, barely-there finish.
Powered by Spraymulse® for a light, easy-to-apply texture and Hydratagel G to help boost and maintain skin hydration. This SPF 50 mist provides daily protection without compromising on comfort.
The fine spray leaves skin feeling fresh, smooth, and nourished with a weightless finish that's perfect for everyday wear and reapplication.
Pale Yellow Fluid Emulsion
7.0 - 7.5
1,500 - 2,500
| A | w/w% |
|---|---|
Spraymulse®A low-viscosity emulsifier system that creates sprayable, stable emulsions with high oil loads. | 1.25% |
| Glycerin | 3% |
Hydratagel GReady to use Hyaluronic Acid | 2% |
| Water | 44% |
| PARSOL® HS (25% Solution) | 13% |
| B | w/w% |
|---|---|
| PARSOL® EHT | 3.5% |
| PARSOL® DHHB | 8.5% |
| PARSOL® Shield | 3.5% |
| CCT | 15% |
| Eldew Sl-205 | 5% |
| C | w/w% |
|---|---|
| Tocopherol | 0.25% |
| PE9010 | 1% |
Combine phase A in a beaker and heat to 75°C. Hold this temperature for at least 10 minutes.
Combine phase B in a separate beaker and heat until all solids are melted.
Homogenise phase A until fully combined.
Add phase B to phase A under homogenisation and homogenise for several minutes until fully combined.
Cool under high-speed stirring (650RPM).
Add phase C and stir in by hand until combined.
Use NaOH to adjust pH to between 7-7.5.
The formulation above is intended for information purposes only based on the best of our knowledge. It is the responsibility of the customer to undertake the appropriate testing to determine the suitability of the product for their intended use.